Acoplaster F
Acoplaster is a smooth acoustic plaster system with the finest surface finish on the market. The structure of the system consists of two components: A non-combustible mineral wool panel and an acoustic plaster top layer. The acoustic plaster material is applied in a total thickness of 35 mm (3 mm panel adhesive, 30 mm mineral wool, 2 mm plaster layer).
The various layers are applied in several process steps. First, the panel material is glued and applied over the entire surface of the plasterboard or directly to the building structure. The plaster layer is then applied. Once the plaster has dried, it is sanded down to correct any unevenness. Any damage that occurs later can be easily and invisibly repaired by applying some additional material and sanding it down again once it has dried.
This product can be used on almost any surface, even in swimming pools thanks to its hygroscopic properties. The weight after application is 7-8 kg/m2.
Download data sheet
We make time for good conversations.
kustik are acoustic consultants, project managers, experienced craftsmen and simply enthusiastic about acoustically good rooms. We want to get to know you and your project!
Acoustic values
Structure
5 mm
15 mm
32 mm
42 mm
αw
0.40
0.65
0.85
0.90
NRC
0.90
0.90
0.90
0.90
For our building acousticians
Specifications
-
Efectis, 1350-1:2018, B-s2.d0
-
White and any other specified color by adding pigments to the plaster.
-
Dust and cobwebs can be removed using a vacuum cleaner with a soft textile nozzle. Another option is cleaning with dry ice. A maintenance contract can also be concluded for this.
-
Minor repairs or touch-ups can easily be carried out by hand.
-
The material can be applied using an airless spraying technique. Application with a roller is not recommended.
-
The substrate must be clean, dry and airtight (seal drywall joints)
The surface quality of the substrate determines the evenness of the final result
Match junction boxes and the like to the thickness of the insulation layer
Customized solutions are available for spots in the form of sleeves or 3D designs and prints
If a flush wall or frame finish cannot be achieved, an end profile must be installed
Assembly is carried out using mobile scaffolding and/or scissor lifts
The temperature should be ≥15°C during and after processing
To speed up the drying process, we recommend the use of fans and construction dryers
A moisture meter is provided to monitor the drying process
Sample order
